shenzhen penglai

Product(model YX-FM20L-05 five heads oil filling machine 20L drum filler) Details:
Video link:
https://www.youtube.com/watch?v=DEkv3SO8VJE
 

Working flow of weight filler equipment:
Automatic weighing filling capping line YX-FM20L working process: Put pails manually ---Conveying automatically ----Locating & Filling automatically---- Conveying automatically.
 
APPLICATION of filling machine:

The Automatic Filling Line is suitable for Coating, paint, ink, adhesive liquid, hardener, resins,  dyes, washing liquid, glycerine, lubricant oil, edible oil, flavors, solvents, additives, pesticide, daily chemicals, diluter liquid  and a variety flowing liquid etc.

Painting/lubricants Filling Machine 10-20L Barrel Weighing Machine with powered conveyor

Features of automatic linear type bucket filling machine:

1. Filling Method: Filling from top.

2. Control Mode: Manual setting filling way, micro switch control.

3. Conveying Mode: Roller Type Conveying without motor

4. Own digital displaying filling quantity function, can finish multi-kinds filling quantity   setting.

5. Automatic peeled, based on net weight filling function.

6. Own vacuum withdrawing function to avoid anti-drip.

7. With manual & automatic micro switch control system function.

8. Dual speed control function to prevent splashing.

9. With emergent treatment to avoid misuse and protect power-off.

10. With SUS316 material of inside pipeline, which is liquid contact part.

Basic parameter of liquid filling capping machinery:

Model YX-FM20L-05

Metering of filling:weight

Accuracy:±0.2%

Weighing Range : 5-30kg

Filling Speed :600-720pcs/hour 

Air Supply  :165L/min (5.8CFM)

Power Supply  :110V 60HZ single phase(or customized as requested)

Dimension(mm)  :3500x1450x1670mm 

Weight   :380kg  

Optional part for transfering materials from storage tank to filling station according to materials viscosity:

Notice on how to run the filling capping machine:
1) Unpacking
When unpacking the case, properly keep the packing list, qualification certificate, specification, and accessories and spare parts.
2) Installation instruction
The instrument should be securely mounted on the control panel of electric cabinet.
Installation place should be free from vibration source, taking sun-proof, high temperature prevention, freeze prevention, moisture proof and rain proof measures.
3) Wiring precautions
Each ground terminal should be well grounded, correctly connected and securely fixed.
The instrument should not share any distribution box, power socket and power lines (including ground lead) with interfering electric equipments as it would affect the performance of the instrument. If it is necessary, power filter should be added in the power circuit for isolation.
To prevent unnecessary interference, shorten length of sensor cables as much as possible and keep sensor away from power lines and control lines.
4) Precautions for use
To prevent negative phenomena such as over high and low voltage and waveform distortion, maintain power supply stability as much as possible.
To prevent instrument damage, NEVER press randomly, heavily and strike on instrument keypad or buttons.
To prevent personal injury or equipment damage, NEVER dismantle the instrument at will, whether in a power-on state or not.
The instrument allows for break-point memory and generally, after completing preset batch numbers, set manual/automatic switch under manual state before for next round of batching and then power off switch. See relevant sections for shutdown of break-point memory function.
5) Maintenance precautions

Never plug in or out the connectors on rear board or replace fuses and sensors in a power-on state.
To prevent misalignment or imbalance, instrument calibration or setting shall only be carried out by our company personnel or professional.
Do not clean instrument with organic solvents of HC, alcohol and ketone type, or with strong acid or alkali solution as it would damage instrument enclosure, panel and internal components.
No arbitrary repair or modification to the instrument is acceptable and, in case of equipment failure, please follow the operating instruction or contact with us, or otherwise no preferential after-sales service would be offered.
The equipment, if left unused, should be powered on at least once every month with a period of more than 1h, removing internal moisture.
Filling capping Machine in wooden packaging before ocean shipping:

ALL RIGHTS RESERVED by ^®PENGLAI MACHINES LIMITED